>>> RMA3K MIXER ASSEMBLY <<<
Printed Circuit Board Layout
===
LO frequency and power set to 2 GHz and 7 dBm; RF frequency varied from 2.1 to 2.9 GHz and power set to -20 dBm. The Max series on the plot is from the MCL data sheet for the ADE-30 SMD mixer. Since the PC Board material used in this mixer assembly is FR-4, loss above 2 GHz is higher than Duroid.
===
LO frequency and power set to 1 GHz and 7 dBm; RF frequency varied from 1.1 to 1.8 GHz and power set to -20 dBm. The Max series on the plot is from the MCL data sheet for the ADE-30 SMD mixer.
===
LO varied from 1.0 to 1.8 GHz, 7 dBm; power measured at RF port, IF port terminated with 50 ohm SMA load.
===
LO varied from1.0 to 1.8 GHz, 7 dBm; power measured at IF port, RF port terminated with 50 ohm SMA load.
===
10/25/07